Hollywood VR-652 - Manual (Page 9)

9
SPEAKER PLACEMENT
Place the speakers as follows :
• Front speakers: Place the front speakers with their
front surfaces as flush with TV or
monitor screen as possible.
• Subwoofer: Place the subwoofer any where in the
front as desired because the low
frequencies it reproduces are non-
directional.
or
5.
CONNECTING SPEAKERS
Plug this cord into a wall AC outlet.
6.
AC INPUT CORD
• Be sure to connect speakers firmly and
correctly according to the channel (left and
right) and the polarity (+ and -).
If the connections are faulty, no sound will
be heard from the speakers, and if the
polarity of the speaker connection is
incorrect, the sound will be unnatural and
lack bass.
• Depending on the type of your subwoofer,
connect it as follows.
• Connect the SUBWOOFER PREOUT jack
to the active (powered) subwoofer. (For
details on the operation of the subwoofer,
refer to "Operating instructions of your
active subwoofer" )
• Connect the SUBWOOFER terminals to the
passive subwoofer.(For details on the
operation of the subwoofer, refer to
"Operating instructions of your passive
subwoofer" )
Caution :
• Be sure to use the front speakers with the
impedance of 6 ohms or above and the
passive subwoofer with the impedance of 4
ohms or above.
• Do not let the bare speaker wires touch
each other or any metal part of this unit.
This could damage this unit and/or the
speakers
ENGLISH