Honeywell T4700 - Manual (Page 11)

11 69-1396—2
NOTE: To exit the programming mode: 1) press and hold the Prog key for three seconds and
the display returns to Run mode, or 2) during the programming session, after five minutes
elapsed time with no program change, the display reverts to Run mode. This does not
change any of the programmed steps. Simply keep pressing the Prog key until you arrive
at the desired mode.
Table 6. Programming Additional Functions.
Function Press This Key Display Shows Description
Begin
sequence to
convert
display
or mode.
Press and hold both the Prog and
Func keys. Initially a random four-
digit/letter display occurs (for
example, FF FF). Continue to
press Prog key until temperature
symbol appears.
Convert to °C
or °F.
Press Prog key a second time to
display °C.
Use (+) key to change to °F if
desired (or °F to C°).
Convert 5-1-1
to 7 day.
Press Prog key a third time to
display 511d.
Press (+) key to change mode to
7-day programming (or back to 5-
1-1 programming). Then adjust
using the (+) or (-) keys.