Hague Quality Water Intl WATERMAX 60 SERIES - Manual (Page 17)

WaterMax 60 Series Owner’s Manual 11/10/2008 17
Service Settings, Cont.
Display Meaning Possible Values Comments
72–96 Hour
Regeneration
No
A way to force regeneration at
regularly-scheduled intervals No (or Yes, for iron) See 72–96 Hour
Regeneration that follows.
Displays only when in
Modes 2 or 3
Distiller/RO No Indicates if a distiller or reverse
osmosis appliance is plumbed to use
filtered water from the appliance
No (or Yes if a distiller or
reverse osmosis appliance
is used) Displays only when in
Mode 2
Backwash 1 01.0 Number of minutes the first backwash
cycle lasts 00.0 to 99.9 Set to the nearest tenth of
a minute
Brine/Rinse 30.0 Number of minutes the first brine and
slow rinse cycle lasts 00.0 to 99.9 Set to the nearest tenth of
a minute
Backwash 2 05.0 Number of minutes the second
backwash cycle lasts 00.0 to 99.9 Set to the nearest tenth of
a minute
Salt per
Regen lbs.
06.2
Amount of salt set to be used in each
regeneration to achieve the capacity
setting 00.0 to 99.9 lb (kg) Set to the nearest tenth
Turbine Pulses
Normal Used by qualified personnel for
diagnostic purposes Normal
Test Mode
Regenerate
Tonight
Yes
Sets the appliance to regenerate
tonight No or Yes If set to Yes, it will force a
regeneration at the next
set regeneration time
(such as 02:00 AM). After
the regeneration, the value
will be set to No.
Displays only when in
Modes 1 or 2