Heat & Glo Fireplace Heat & Glo Fireplace AT-GRAND - Manual (Page 18)

15
• Remove the glass door from the unit.
• Cover the top of the burner with a single layer of
ember material. Then sprinkle GE-93 on top of the
burner.
• Save the remaining ember materials for use during
fireplace servicing.
• Replace the glass door.
• Reset the four glass eye bolts, be sure they are
securely latched.
• Replace the trim door.
1. Lift the top trim door
up and out of the unit.
2. Pull out and rotate the
glass release eye
bolts at the top and
bottom edges and
remove the glass
door from the unit.
Figure 10. Glass Assembly
1. Place the ember
material onto the top
of the burner.
Figure 11. Placement of the Ember Material
GLASS DOOR