Hoshizaki KM-1601SWH/3 - Manual (Page 18)

18
7) Replace the panels and baffle in their correct positions (unless you are installing
an upper unit).
Note: The bin control thermostat must be checked for proper operation at startup.
E. Installation of Upper Unit
See Fig. 6
1) See "II.D. Setup" for the lower unit installation.
2) Remove the top panel and the top
insulation of the lower unit. These pieces
must be removed when installing an upper
unit.
3) Unpack the upper unit, and remove
the shipping carton, tape, and packing
material.
4) Remove the panels of the upper unit.
5) Stack the upper unit on top of the lower
unit.
6) Secure the upper unit to the lower unit
using the 2 mounting brackets and the
bolts provided. See Fig. 6.
Fig. 5
Thermostat Extension
Bracket (stainless)
Thermostat Bracket
(plastic)
Thermostat Bulb
Attachment (plastic)
g. Remove the 2 screws from the lower part of the thermostat bracket (plastic) and
use them to attach the thermostat extension bracket (stainless) to the thermostat
bracket (plastic). See Fig. 5.
Fig. 6
Icemaker
(Upper Unit)
Mounting
Brackets
Bin
Icemaker
(Lower Unit)
Bolts