Honeywell CT3650 - Manual (Page 11)

11 69-1285—2
STEP 7. CUSTOMIZE YOUR THERMOSTAT
Your Honeywell CT3650 thermostat comes preset to the most commonly used settings. The settings are:
Gas or oil forced air furnace.
Smart Response technology on.
Temperature °F.
12-hour clock format.
You can change any or all of these settings.
IMPORTANT
Always press the keys with your fingertip or a similar blunt tool. Sharp instruments like pens and pencil
points can damage the keyboard.
❑ Press and hold down , , and , simultaneously until the screen shows.
You now can change any of these settings.
Fan Operation (Feature Number 2)
Fan operation options are:
0 = Gas or oil furnace. Furnace controls fan operation during heating (preset).
1 = Electric furnace or single stage heat pump. Thermostat controls fan operation during heating.
To change fan operation:
❑ Press once.
❑ Press Time to move to next feature or to return to main display.
System Type (Feature Number 4)
System type options are:
1 = Gravity or steam system.
3 = Hot water, high efficiency furnace (90% or better), or single stage heat pump.
6 = Gas or oil forced air furnace (preset).
9 = Electric furnace.
To change your system type:
❑ Press until display shows your furnace or boiler type.
M13347
FEATURE
NUMBER OPTION
Run
Program
M13348