Hotpoint SEO100 - Manual (Page 11)

Steam cooking
Cooking immediately
Steam cooking at 100°C.
Press the button .
A time of 25 minutes is
suggested.
Adjust the cooking time as neces-
sary ( minimum 5 min and maxi-
mum 60 min by pressing on + and -
button
Validate with
the START
button.
You MUST IMPERATIVELY fill the water tank up to the maximum level
before starting cooking. Put the tank back in place, and push it as far as
possible until it CLICKS INTO PLACE.
The symbol comes on. When the temperature is reached, 100° becomes cons-
tant, and a beep sounds.
Operational
principle
The water contained in the tank reaches the cavity via a
tube. This water is transformed into steam on contact with
a hot surface placed in the lower part of the cavity:
the steam generator.
There is no need to add water to the cooking dish. To
guarantee TRUE STEAM COOKING, your oven is supplied
with a set of tin ware specially designed for cooking to
perfection.
1 2 3
4
In order to avoid altering the results of the cooking, avoid opening the
appliance door during cooking.
When cooking, the appliance gets hot. Hot steam may escape when you
open the door of the appliance. Keep children out of the way.
SET STOP
START
1
2
3
SET STOP
START
84
99635871 CLIENT.qxd 14/02/05 09:54 Page 84