Hitachi VT-FX631A-VT - Manual (Page 62)

62
3. Press and hold the "CATV" button.
4 Press the number button corresponding to your cable box a shown in the set-up chart. The
cable box channel will change to confirm that the remote control has been set
Cable Box Press "CATV" and
this remote button Cable Box Press "CATV" and
this remote button
Jerrold 1 1 Zenith 5
Jerrold 2 2 Scientific
Atlanta
6
Jerrold 3 3 Pioneer 7
Hamlin 4 Philips 8
Note: If your cable box is not listed on the Set-Up Chart, try all the buttons listed in the chart until the
cable box changes channels. If the cable box channel does not change, you won't be able to program the
remote for your cable box.
•
Using the VCR remote to control your cable box.
1 Press the "CATV" button on the remote control.
2 Point VCR remote control toward cable box.
3 Press the CH (channel / ) button.
Remote Control Illustration.