Hitachi VT-FX631A-VT - Manual (Page 42)

42
Remote Control Illustration.
4 Press the CH ( / ) button or the number buttons to select the channel you want to record.
for the longest recording time on a single tape).
Example: Select channel 8.
• 100/ENT and (2) and (4) for the channel 124.
Remote Control Illustration.
5 Press the REC button on the remote control or the REC/IRT button on the VCR.
Recording will start and the REC indictor on the VCR will appear.
Notes:
• Recording will not start unless the cassette has the safety tab in place. When a cassette without a safety
tab is inserted, "TAb" will flash in the VCR display for several seconds and the cassette will be ejected
automatically.
• Press the PAUSE button to set the VCR to the recording pause mode.
Press the button again to re-start recording.
• If you stay in PAUSE mode for more than 5 minutes, the VCR automatically switches to STOP mode
to protect the tape.
6 Press the STOP button to finish recording.