Honeywell DOLPHIN 9700 - Manual (Page 78)

8 - 6
Dolphin Wireless Manager Window
Tap Start > Settings > Connections > Dolphin Wireless Manager .
Enabling the Radios
1. Tap Start > Settings > Connections tab > Dolphin Wireless Manager.
2. Tap anywhere inside the rectangle or the OFF button inside the rectangle.
3. The radio begins activating.
4. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON.
Note: If applicable, information about the radio appears in the rectangle.
If a rectangle is grayed-out,
then the radio is not installed
on the terminal.
If applicable, information about
the radio appears when the
radio is activated.
These buttons show you the
state of the radio.