HP mp3130 Series - Manual (Page 2)

Make necessary roll and yaw adjustments to the projector.
(YAW ADJUSTMENT)
v v v v v
Open the on-screen menu and select Setup > Projector Position. Select the
appropriate ceiling option.
x
(ROLL ADJUSTMENT)
±20°
±60°
w
Copyright Hewlett-Packard Development Co., L.P.
First Edition (November 2003)
Printed in Taiwan
C
Front Clamp
Ceiling
Bracket
Install the front clamp onto the ceiling bracket. The rubber bumper
should fit over the tilt button.
Attach the ceiling bracket to the ceiling rod with the two screws.
Height adjustments can be made by using different holes on the
ceiling rod and ceiling bracket.
v v v v v The total adjustment range is 0 to 1 inches
(0~2.5cm). Adjustment can be made in one
inch (2.5cm) increment.
180°
Screws
Ceiling Rod
Apollo Ceiling Mount_En.p65 92/11/25, PM 04:36 2