Hotpoint SDW 60 - Manual (Page 9)

9
D ISHWASHER
Programme Chart
Select the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:
To optimise wash performance and save on energy, try yo use the dishwasher with a full wash load. If it takes some time to fill your
dishwasher, use the soak cycle to avoid caked on food and build up of bad odours.
CYCLE CYCLE SELECTION
INSTRUCTIONS
CYCLE
DESCRIPTION
DETERGENT
FOR PRE-
WASH & WASH
RINSE
AID
WASH CYCLE
DURATION
in minutes
(Tolerance
±10%
INTENSIVE Very dirty dishes and pans
(NOT to be used for delicate
items)
Pre-wash with hot water at 40°C
Wash at 65°C
2 cold rinses
Hot rinse at 65°C
Drying
3+24 g * 120
NORMAL Cycle for normally dirty pans and
dishes.
Standard daily cycle. Wash at 55°C
Cold rinse
Hot rinse at 70°C
Drying
27 g
*
93
ECO Environmentally friendly cycle,
with low energy consumption
levels, suitable for normally dirty
pans and dishes.
2 cold pre-washes
Wash at 45°C
Hot rinse at 65°C
Drying
3+24 g
*
145
FAST & Dry Economic and fast cycle to be
used for slightly dirty dishes.
Run cycle immediately after use. Short wash at 40°C
Hot rinse at 65°C
Drying
20 g
*
40
PRE-WASH Preliminary wash cycle for dishes
while awaiting completion of the
load with the dishes from the next
meal.
Short cold wash to prevent food
from drying onto the dishes.
12
DELICATES Special cycle to be used for more
delicate items which are sensitive
to high temperatures.
Run cycle immediately after use.
Wash at 50°C
Rrinse at 45°C
Hot rinse at 65°C
Drying 20 g
*
90