Wolf 15 Inch Transitional Induction Cooktop Installation Instructions - Manual (Page 9)

CLEAT OPTION
For this installation, the countertop cut-out will be the same
size as the outer edge of the cooktop glass.
Attach L-shaped cleats to the perimeter of the countertop
cut-out. The top edge of the cleat can not be wider than
7 /
8
" (22) and will be attached 5 /
16
" (8) below the surface of the
countertop. Refer to the illustration below. Attach the cleats
to the countertop. Consult a countertop supplier for proper
methods of attachment.
INSTALLATION
Flush Installation
To ensure a proper installation, a template for the countertop
cut-out should be created using the cooktop glass.
ROUTING OPTION
For this installation, a recessed area surrounding the coun-
tertop cut-out is required. Fabrication of the recessed area
must take place before the countertop is installed.
This option is not recommended for countertops with a
molded backsplash.
7 / 8 " (22)
5 / 16 " (8)
L-SHAPED
CLEATS
Support cleats.
wolfappliance.com | 9