beautypg.com

Cooktop installation, Troubleshooting – Wolf 15 Inch Transitional Induction Cooktop Installation Instructions User Manual

Page 10

background image

10

|

Wolf Customer Care 800.222.7820

INSTALLATION

Cooktop Installation

Remove the cooktop and components from the shipping
package and recycle packing materials.

1

Lower the cooktop into the countertop cut-out. Center

the cooktop in the opening with the front edge aligned
parallel to the front edge of the countertop. Using a
pencil, outline the rear edge of the cooktop on the coun-
tertop. Remove the cooktop.

2

Apply the foam strip to the perimeter of the countertop

opening. Refer to the illustration below. Do not seal the
cooktop to the countertop.

3

Insert the cooktop into the opening. Verify the cooktop is

aligned with the front edge of the countertop.

4

Attach the brackets provided, to the bottom of the unit.

Insert the 3

1

/

2

"

(89)

clamping screws into the brackets.

Use a screwdriver to tighten the clamping screws
against the bottom of the countertop. Do not overtighten
screws. Refer to the illustration below.

Troubleshooting

IMPORTANT NOTE:

If the cooktop does not operate prop-

erly, follow these troubleshooting steps:

Verify electrical power is supplied to the cooktop.

If the cooktop does not operate properly, contact Wolf

factory certified service. Do not attempt to repair the
cooktop. Wolf is not responsible for service required to
correct a faulty installation.

FOAM STRIP

COUNTERTOP

BRACKET

CLAMPING

SCREW


Cooktop installation.