Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual

Page 146

VIVOTEK

146 - User's Manual

To start a module, select the checkcircle in front, and click the

Start

button.

If you should need to remove a module, select the checkcircle in front and then click the

Stop

button. By then the module status will become

OFF

, and the

button will appear at

the end of the row. Click on the

button to remove an existing module.

When prompted by a confirm message, Click

Yes

to proceed.

Yes

Note that the actual memory consumed while operating the module will be indicated on the

Memory status

field. This helps determine whether a running module has consumed too

much of system resources.

To utilize a software module, acquire the software package and click

Browse

and

Upload

buttons. The screen message for a successful upload is shown below: