Marantz Stereo 70S 2.1-Channel Network A/V Receiver - Manual (Page 142)

o INPUT MODE
Set the audio input modes for each input source.
It is normally recommended to set the audio input mode to “AUTO”.
AUTO
(Default):
Automatically detect input signal and
perform playback.
HDMI: Play only signals from HDMI input.
DIGITAL: Play only signals from digital audio input.
ANALOG: Play only signals from analog audio input.
0
If “ARC” is set to “On” and a TV compatible with the ARC is connected via the
HDMI OUT connectors, the input mode whose input source is “TV Audio” is
fixed to ARC.
o Set Defaults
The “Input Assign” settings are returned to the default settings.
0
This unit supports analog audio signals and PCM 2-channel signals. To connect
devices with the HDMI and DIGITAL connectors, set “PCM 2ch” as the audio
format in the audio device settings.
Contents Connections Playback Settings Tips Appendix
142
Front panel Display Rear panel Remote Index