Marantz Stereo 70S 2.1-Channel Network A/V Receiver - Manual (Page 110)

o TV Audio sharing settings
You can enjoy the same content as the MAIN ZONE in ZONE2 while
playing the content from TV or other playback devices in the MAIN
ZONE.
By saving the following settings in advance to Smart Select, you can
easily call up the playback environments to be used in the MAIN
ZONE and ZONE2 with this function.
1
Select the input source to play back in the MAIN ZONE.
2
Press Z2 then press POWER X with remote control to
turn on the power of ZONE2.
3
Select “Source” as the input source for ZONE2.
If “Source” is selected as the input source of ZONE2, the input
source is changed to mirror that of the MAIN ZONE.
0
The factory default setting for the ZONE2 input source is
“Source”.
0
If you have changed the input source for ZONE2 to a different
setting, use the “Marantz AVR Remote” App to change it to
“Source”.
A
Tap zone control (
K
) to select ZONE2.
B
Select “Source” as the input source.
4
Press and hold the desired SMART SELECT until
“Smart* Memory” appears on the display.
0
The ZONE2 input source cannot be set to “Source” from the main unit or remote
control unit.
Contents Connections Playback Settings Tips Appendix
110
Front panel Display Rear panel Remote Index