Yamaha ADECIA RM-TT Wired Tabletop Array Microphone (Black) - Manual (Page 5)

Eng
lish
5
RM-TT Installation Manual
To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other
property, follow the notices below.
Handling and maintenance
• Do not use the product in the vicinity of a TV, radio, or other electric products. Otherwise, the
product, TV, or radio may generate noise.
• Do not install the product in a location where magnetic fields are strong. Otherwise, it might
cause the product to malfunction.
• Do not expose the product to excessive dust or vibration, or extreme cold or heat, in order to
prevent the possibility of disfiguration, unstable operation, or damage to the internal
components.
• Do not install in locations where temperature changes are severe. Otherwise, condensation
may form on the inside or the surface of the product, causing it to break.
• If there is reason to believe that condensation might have occurred, leave the product for
several hours without turning on the power until the condensation has completely dried out, in
order to prevent possible damage.
• Do not use a LAN cable that comes into contact with the product case or applies excessive
force to the connector.
• Do not touch the interior of a port with your fingers or any metallic object.
• Do not place vinyl, plastic or rubber objects on the product, since this might cause alteration
or discoloration.
• When cleaning the product, use a dry and soft cloth. Do not use paint thinners, solvents,
cleaning fluids, or chemical-impregnated wiping cloths, since this might cause alteration or
discoloration.
NOTICE