Yamaha ADECIA RM-TT Wired Tabletop Array Microphone (Black) - Manual (Page 4)

4
RM-TT Installation Manual
Location and connection
• When connecting this product with a PoE injector or a PoE network switch, use a LAN cable
which supports PoE. If you connect a cable that does not comply with specifications, or
connect a flat type or slim type cable, fire or malfunctions might occur.
• Do not damage the LAN cable. Failure to observe this precaution could result in fire, electric
shock, or damage to the product.
- Do not place heavy objects on the cable.
- Do not process the cable in any way.
- Do not use staples to fix the cable in place.
- Do not apply excessive force to the cable.
- Be sure to keep the cable away from anything hot.
• Do not place the product in an unstable position or a location with excessive vibration, where
it might accidentally fall and cause injury.
• Keep this product out of reach of children. This product is not suitable for use in locations
where children are likely to be present.
• Do not place the product in a location where it may come into contact with corrosive gases or
salt air. Doing so may result in malfunction.
• Do not route a LAN cable where someone might trip over them, such as in a location where
people pass. Tripping on a cable may cause a person or this product to fall down, resulting in
personal injury or damage to the product.
• Before moving the product, remove the connected LAN cable.
• Install in the manner instructed in the manual. Falling may result in injury or damage.
• Confirm that the finished installation is safe and secure. Also, carry out safety inspections
periodically. Failure to observe this may cause devices to fall and result in injury.
• Always consult qualified Yamaha service personnel if the product installation requires
construction work. Improper installation might cause accidents, injuries, damage or
malfunction of this product.
Handling caution
• Do not rest your weight on the product or place heavy objects on it.