M-AUDIO Air 192|4 Vocal Studio Pro Desktop 2x2 USB Type-C Audio Interface with Mic and Headphones - Manual (Page 4)

4
Connection Diagram
Items not listed under Introduction > Box Contents are sold separately.
Note:
•
Remember to select AIR 192|4 as your interface in the Preferences , Options , Device
Setup , etc. in your digital audio workstation (DAW).
•
Use the +48V (Phantom Power) Switch only if a microphone requires phantom power.
Most dynamic microphones and ribbon microphones do not require phantom power, but
most condenser microphones do. Consult your microphone's documentation to find out
whether it needs phantom power. When using the included NOVA Black microphone, turn
the
+48V (Phantom Power) Switch on.
Audio Setup
Windows users: Before connecting AIR 192|4 to your computer, install the driver:
1. Go to m-audio.com/drivers and download the latest AIR 192|4 driver for your operating
system.
2. Open the file you downloaded and double-click the driver installer file.
3. Read the End-User License Agreement, then check the box to Agree and click Next to
continue.
4. Click Install to begin the installation. You may be asked to connect AIR 192|4 to your
computer during the installation process. Click Install on any further system messages
during the installation.
5. Once the installation is complete, click Finish .
To use the Windows driver, open the M-Audio AIR 192|4 Control Panel . Here, you can set
your Preferred Buffer Size and Sample Rate .
Front Panel Rear Panel
Powered Monitors
Headphones
Guitar
Computer
Microphone