ION Audio Projector Max HD Full HD Portable Projector and Bluetooth Speaker - Manual (Page 7)

7
Setup
Getting the Projector Ready
To set up the projector:
1. Power up the projector by flipping Projector Max ™ HD’s Power Switch to the on position
and then pressing the Projector button .
2. Position Projector Max ™ HD in front of your projection screen, making sure that the lens is
facing the screen. The closer that Projector Max ™ HD is to the projection screen, the
smaller the projected video will be. You’ll get a clear picture when the size of the projected
video is between 4 feet and 16 feet.
Note: The lens should be at the same height as the center of the projected video (as
pictured below).
3. Focus the lens as needed by turning the Focus Ring until you achieve a clear picture.
Some tips on using the projector:
•
The projector will work best when used in
a dimly lit environment.
•
White is the ideal color for the surface of
the projection screen.
•
The lens should be perpendicular to the
projection screen. If Projector Max ™ HD is
not sitting on a level surface, you can
correct the angle of the lens
by using the
Keystone Adjustment or by
raising/lowering the adjustable foot on the
bottom of the unit.
•
When you are done using the projector,
fasten the included lens cap to the lens. If
you are having trouble, use the
Focus
Ring to make sure that the lens is
extended enough in order for the lens cap
to latch onto it.
Projector
Max
™ HD
Lens
Projection Screen
Projector Max ™ HD
Bottom Panel
Adjustable Foot