Orion Images R4N49NNU 48.5" 4K UHD Video Wall Display - Manual (Page 11)

R00 11
3.5 CONFIGURE THE VIDEO WALL
*Please install COMMANDER(Video Wall Control Program) for remote control of the monitors through the computer.
For information about installing and using COMMANDER, please refer to the installation disk that came with the monitor.
* DP daisy chain only operates with R4N products.
CABLE CONNECTION
*Cable connection order, it may be different
from the order of the ‘SET ID’ of ‘SEQUENCE’
(Refer to page 15~17)
1st MONITOR 2nd MONITOR 3rd MONITOR 4th MONITOR
DVI IN
HDMI1 IN
HDMI2 IN
HDMI3 IN
DP IN
DP OUT
RS-232 IN
RS-232 OUT
[ USER MANUAL ]
1. You can combine two or more monitors, and configure the VIDEO WALL.
2. If you want to configure VIDEO WALL, please contact your dealer or a professional installer.
3. JOINT BRACKET helps to easily adjust the VIDEO WALL. (Supplied with monitor)
4. Using a JOINT BRACKET can help to prevent distortion or sagging due to weight, But may not be available in an installation
environment where there is no space behind the product.
* Assemble the JOINT BRACKET using four M4 screws.
OR