BenQ PL5502 55" 4K Video Wall Display - Manual (Page 26)

Color calibration & video wall setup software 26
Color calibration & video wall setup software
The uniformity in image representation is a vital element in creating a video wall that
consists of multiple displays. However, due to factors like component variation and aging,
it is inevitable for each display to produce images with slight differences in color and
luminance even when related settings are identical among all displays. The color
calibration is designed to minimize such differences and enhance the image uniformity of
all displays in a video wall application. It works by first measuring and comparing the
color characteristics of each display, and then calibrating all displays with a common and
optimal setting.
With the color calibration, you can also adjust color settings of each display easily on a
host computer. Furthermore, with video wall control function, you can finish all setting
on the laptop without switching back to the remote control.
Preparation
1. Install the configuration and calibration tool on the laptop.
2. Connect the color meter to the laptop.
3. Connect laptop to video walls (input source).
- DVI daisy chain supports DVI/HDMI/DP source in.
Item Hardware requirements
Color meter X-Rite i1D3
System
CPU Pentium 1GHz
Storage 400 MB
OS Win 7 (32bit / 64bit), Win10 (32bit / 64bit)
Interface HDMI/DVI/DP (at least one of them supported)
USB 2.0 (type A) x 2
HDMI IN
HDMI
HDMI2 IN