BenQ PL5502 55" 4K Video Wall Display - Manual (Page 11)

Setting up the display 11
Setting up the display
Installation Notes
• Due to the high power consumption, always use the plug exclusively designed for this
product. If an extended line is required, please consult your service agent.
• The product should be installed on a flat surface to avoid tipping. The distance between
the back of the product and the wall should be maintained for proper ventilation. Avoid
installing the product in the kitchen, bathroom or any other places with high humidity
so as not to shorten the service life of the electronic components.
• The product can normally operate only under 5000m in altitude. In installations at
altitudes above 3000m, some abnormalities may be experienced.
Mounting on a wall
VESA Standard:
PL4901: 600 x 400 (4 - M6 x 40L)
PL5501: 600 x 400 (4 - M6 x 40L)
PL5502: 600 x 400 (4 - M6 x 40L)
To mount this display to a wall, you will have to obtain a standard wall-mounting kit
(commercially available). We recommend using a mounting interface that complies with
TUV-GS and/or UL1678 standard in North America.
1. Lay a protective sheet on a table, which was wrapped around the display when it was
packaged, beneath the screen surface so as not to scratch the screen face.
2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount,
table stand, etc).
3. Follow the instructions that come with the base mounting kit. Failure to follow
correct mounting procedures could result in damage to the equipment or injury to
the user or installer. Product warranty does not cover damage caused by improper
installation.
4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer
than the thickness of the mounting bracket) and tighten them securely.
127(81,7PP
%(=(/:,'7+7%/5
:$//028176&5(:7+5($''(37+0/
PL4901
127(81,7PP
%(=(/:,'7+7%/5
:$//028176&5(:7+5($''(37+0/
PL5501