5 specifications – Akg HM 1000 Ceiling Hanging Module for CK Series Microphone Capsules User Manual
Page 40

40
DISCREET ACOUSTICS modular
5 Specifications
* Re 1 V/Pa
** Except GN 30 OC
This product conforms to the standards listed in the Declaration of Conformity. To
order a free copy of the Declaration of Conformity, visit http://www.akg.com or
contact [email protected].
Installation Module w/
CK 31
CK 32
CK 33
Type
Pre-polarized condenser microphone
Polar pattern
Cardioid
Omni
Hypercardioid
Frequency range
50-20,000 Hz
20-20,000 Hz
50-20,000 Hz
Sensitivity
20 mV/Pa
14 mV/Pa
20 mV/Pa
-34 dBV*
-37 dBV*
-34 dBV*
Electrical impedance
<600
Ω
<600
Ω
<600
Ω
Rated load impedance
>2000
Ω
>2000
Ω
>2000
Ω
Power requirement
9-52 V phantom power to IEC 61938 -
Requires DPA-P or DPA adapter (integrated in
GN** and HM 1000 Installation Modules)
Size (dia. x length)
13 x 25 mm
13 x 25 mm
13 x 25 mm
(0.5 x 0.95 in.)
(0.5 x 0.95 in.)
(0.5. x 0.95 in.)
Connector**
XLR-3 or XLR-5
XLR-3 or XLR-5
XLR-3 or XLR-5
Installation Module w/
CK 47
CK 80
Type
Pre-polarized condenser microphone
Polar pattern
Hypercardioid
Hypercardioid
Frequency range
20-20,000 Hz
60-15,000 Hz
Sensitivity
16.5 mV/Pa
30 mV/Pa
-35.5 dBV*
-30 dBV*
Electrical impedance
<600
Ω
<600
Ω
Rated load impedance
>2000
Ω
>2000
Ω
Power requirement
9-52 V phantom power to IEC 61938 -
Requires DPA-P or DPA adapter (integrated in
GN** and HM 1000 Installation Modules)
Size (dia. x length)
13 x 154 mm
13 x 128 mm
(0.5 x 5.85 in.)
(0.5 x 4.86 in.)
Connector**
XLR-3 or XLR-5
XLR-3 or XLR-5
4513_09_BDA_DAM_Hex0909_ps.qxd 11.09.2009 10:46 Uhr Seite 40