MakerBot METHOD X 3D Printer - Manual (Page 26)

MAK
E
R
B
OT
M
E
TH
O
D
MAN
U
AL
PA
G
E
2
6
EXTRUDER CALIBRATION
When printing with Method’s two Performance Extruders, it is crucial to ensure the distance between both extruders
is set correctly. If the extruders are not calibrated, a part may not print successfully.
Calibration should be run if you are noticing any print quality issues, or if the extruders are changed.
You can access the calibration script on the MakerBot Method by going to Settings > Calibrate Extruders on the
printer’s touch screen.
MAINTAINING THE BUILD PLATE
The surface of the MakerBot Method build plate, known as the Grip Surface, allows for better print adhesion and
print quality compared to other types of build surfaces. However, over time the grip surface can become cracked and
damaged. If these cracks or tears begin to affect print quality, it is time to replace the grip surface.
Visit
HTTPS://SUPPORT.MAKERBOT.COM to learn how to replace the grip surface.
Go to
HTTPS://STORE.MAKERBOT.COM/ to order more Grip Surfaces and build plates.
OTHER ISSUES
For help with issues not covered in this chapter, please go to HTTPS://SUPPORT.MAKERBOT.COM.