Ilford Delta 3200 Black and White Negative Film (120 Roll Film) - Manual (Page 7)

Page 7 of 7 Nov 2018
DELTA 3200 PROFESSIONAL Technical Information
Rinse
For a final rinse use ILFORD ILFOTOL wetting agent added to water, it helps the film to dry rapidly and evenly.
Start by using 5ml per litre of rinse water (1+200), however the amount of ILFOTOL used may need some
adjustment depending on the local water quality and drying method. Too little or too much wetting agent can
lead to uneven drying. Remove excess rinse solution from the film before drying.
Drying
To avoid drying marks, use a clean squeegee or chamois cloth to wipe DELTA 3200 Professional film before
hanging it to dry. Dry DELTA 3200 Professional at 30–40°C/86-104°F in a drying cabinet or at room
temperature in a clean dust-free area.
STORAGE
Unexposed Film
For immediate use, store DELTA 3200 Professional in a cool (10–20°C/50-68°F), dry place in its original
packaging. DELTA 3200 Professional may be stored in a fridge/freezer but allow plenty of time for the film to
acclimatise prior to use.
Exposed film
Once exposed, process DELTA 3200 Professional as soon as practical.
Exposed films should always be stored in cool, dry conditions - as recommended above.
Negatives
Store processed negatives in a cool (10–20°C/50-68°F), dry place, in the dark. Suitable storage sleeves
include those made of cellulose triacetate, Mylar, paper (pH6.5–7.5) or inert polyester.
A wide range of fact sheets is available which describe and give guidance on using ILFORD PHOTO products.
Some products in this fact sheet might not be available in your country.
HARMAN
technology Limited , Ilford Way, Mobberley,
Knutsford, Cheshire WA16 7JL, England
www.ilfordphoto.com