Nissin Di700A Flash for Micro Four Thirds Cameras - Manual (Page 14)

You can select the power by rotating the dial, from
the left to right, 1/128 – 1/64 – 1/32 – 1/16 – 1/8 –
1/4 – 1/2 – 1/1 (Full) power.
You can select the power by rotating the dial, from
the left to right, 1/128 – 1/64 – 1/32 – 1/16 – 1/8 –
1/4 – 1/2 – 1/1 (Full) power.
Wireless Remote Flash
Di700A has a wireless remote flash system as a slave unit. You can enjoy
creative flash photography with multiple lightings from the various directions. 3
slave modes are provided, Slave Digital (SD) for digital pre-flash system; Slave
Film (SF) for analogue flash system and Wireless Remote for wireless remote.
All channels and with groups A / B / C may be used.
SD : In this mode, Di700A synchronizes to the
pre-flash system. The master flash is to be set at
TTL mode.
SF : In this mode, Di700A synchronizes to the
traditional single flash system. The master flash is to
be set at manual mode. Studio lighting system
synchronizes to this mode. This mode is also
available for open flash, and for a standard flash in
the market.
-2.0 -1.5 -1.
0
-0.5 +0.5 +1.0 +2.0 +1.5
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
-2.0 -1.5 -1.
0
-0.5 +0.5 +1.0 +2.0 +1.5
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
Press the on/ off switch once to lock this condition
on your flash. (Press it again to release the lock)
Press the on/ off switch once to lock this condition
on your flash. (Press it again to release the lock)
SF
SD
-2.0 -1.5 -1.
0
-0.5 +0.5 +1.0 +2.0 +1.5
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
-2.0 -1.5 -1.
0
-0.5 +0.5 +1.0 +2.0 +1.5
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
-2.0 -1.5 -1.
0
-0.5 +0.5 +1.0 +2.0 +1.5
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
-2.0 -1.5 -1.
0
-0.5 +0.5 +1.0 +2.0 +1.5
1/128 1/64 1/32 1/16 1/ 8 1/ 4 1/ 2 1/ 1
Set
RMT-TTL mode
RMT2-TTL mode
RMT-M mode
Wireless Remote - Optical Transmission : In this
mode, Di700A synchronizes to the wireless remote
flash system. For remote All channels and with
groups A=Group A/ B=Group B/ C=Group C
digital flash.
Rotate the Function dial to “A” “B” “C” mode then
AF-assist light blinking.
13