Nissin Di700A Flash for Micro Four Thirds Cameras - Manual (Page 10)

Shooting Di700A automatically
Olympus cameras
Panasonic cameras
(Program), (Full Auto), (Aperture priority),
(Shutter priority) or (Manual);
(Program), (Full Auto), (Aperture priority),
(Shutter priority) or (Manual);
Set Di700A to the camera’s hotshoe and press the on/ off switch to power on.
Rotate the Function dial to “A” mode.
Di700A is now set for the camera’s automatic flash control system.
Press the shutter button of your camera halfway to focus the subject.
Take the picture. Di700A is fired and the result is immediately shown on the
camera’s LCD display.
When you change the focal length, the power zoom flash head of Di700A
immediately sets its position to match the lens focal length you selected.
The flash illumination coverage of Di700A responds to the lens focal length of
24mm (12mm) - 200mm (100mm).
In all of the camera's shooting modes listed above, Di700A will fully work in TTL
automatic-flash system.
Shutter speed, aperture and flash mark ( ) are indicated in camera’s view finder.
S
9