Godox VING V860IIC TTL Li-Ion Flash Kit for Cameras - Manual (Page 10)

Positioning and Operation Range (Example of wireless flash
shooting)
● Autoflash Shooting with One Slave Unit
● Use the supplied mini stand to position the slave unit.
● Before shooting, perform a test flash and test shooting.
● The transmission distance might be shorter depending on
the conditions such as positioning of slave units, the
surrounding environment and whether conditions.
Transmission distance is about 100m.
A
B
A
B
C
● Auto Shooting with Two Slave Groups
● Auto Shooting with Three Slave Groups
You can divide the slave units into two or three groups and perform
E-TTL II autoflash while changing the flash ratio (factor). In addition,
you can set and shoot with a different flash mode for each firing
group, for up to 5 groups.
Wireless Multiple Flash Shooting
Wireless shooting using radio transmission has advantages over
wireless shooting using optic transmission, such as being less affected
by obstacles, and not having to point the slave unit’s wireless sensor
toward the master unit. The main functional differences are as follows:
Function
Distance
Channel
A/B/C Power
To be Disturbed
Group
Radio Transmission
100m
1~32
OFF, 1/128~1/1
Hard
A/B/C/D/E
Optic Transmission
15m
1~4
1/128~1/1
Easy
A/B/C
● There are four flash modes in this wireless radio transmission:
TTL, M, Multi and Gr. Choose one of those modes by pressing
the MODE Button.
- 57 - - 58 -
A
C
D
Ceiling
Manual flash
B
Auto external
flash metering
E - TTL II
E
* The flash mode settings are indicated only as an example
● Shooting with a Different Flash Mode set for Each Group
Manual flash
Manual flash