Bolt VM-160 LED Macro Ring Light - Manual (Page 15)

Using the Diffusers | 15
To mount the diffuser on your LED ring:
1. Match up the red alignment line on the diffuser with the OFF
alignment line on the LED ring.
2. Fit the diffuser onto the LED ring and rotate it so the red
alignment line on the diffuser matches up with the ON
alignment line on the LED ring.
To remove the diffuser, rotate it so that the indicator matches up
with the OFF alignment line. The diffuser can then be removed.
Tip: Using the VM-160 without any diffuser in place will result in the
maximum brightness, but the light will also be the least soft.
1
2