Bolt VM-160 LED Macro Ring Light - Manual (Page 10)

10 | Installing Batteries
Installing Batteries
The VM-160 can be powered by four AA batteries of several types:
• Lithium (1.5 V)
• Nickel-metal hydride (Ni-MH) (1.2 V)
• Alkaline (1.5 V)
Note: For the longest battery life, lithium or Ni-MH batteries are recommended.
To install batteries, make sure the VM-160 is turned off and follow these steps:
1. Press on the battery compartment cover and slide it in the direction of the arrow to open it.
2. Insert batteries in the orientations indicated by the illustrations inside the compartment.
3. Close the battery compartment cover by pressing and sliding it into place, in the opposite direction of the
arrow on the cover.