Atlas Sound Atmosphere C-ZSV Zone, Source, and Volume Wall Controller (Black) - Manual (Page 66)

Atmosphere
User Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
[email protected]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
– 66 –
2. Network
The left panel is the wired connection and the right panel is the wireless connection. Both can be connected at the same time, with different IP
addresses. In addition, the wireless can be configured as an access point to directly connect to the UI when a network isn’t available. This is useful
when setting up the device prior to being on-site for install or if the site doesn’t yet have an active connection. Default setting is DHCP. To set up
Static IP, enter the address, subnet mask, and default gateway, then press “UPDATE”. A popup message will verify you want to reboot to save
configuration. The IP address is displayed at the top of the front panel display.
3. Firmware
To review the firmware version and update if needed. It is recommended to save a backup configuration file prior to updating.
Visit atlasied.com to download the latest firmware.