Impact Panel Frame Reflector Kit - Zebra Gold / Zebra Silver (59 x 82") - Manual (Page 7)

7
7. Attach the latch lock in the same
manner as above. The curved
part of the cross bar should
protrude toward you.
3
8. Repeat this process with the
other cross bar in the gaps near
the other end of the reflector.
Note: Always be sure to keep the
Panel Frame well-anchored when
using it outside. Even a light
breeze can move it or knock it
over if it’s not properly weighted.
9. The Panel Frame is now ready for
use. The two cross bars provide a
secure grip for holding the panel,
or they can be used to mount the
reflector to a stand.
4
10. To disassemble the Panel Frame,
follow these instructions in
reverse order.
3 4