Setup - part one – Impact Panel Frame Reflector Kit - Zebra Gold / Zebra Silver (59 x 82") User Manual
Page 4

4
Setup - Part One
1. Open the carrying bag and
remove all elements of the Panel
Frame kit.
2. Assemble a support pole by
pulling the two halves slightly
apart and inserting the end of one
into the other.
1
3. The shock cord will hold the
two halves securely together.
Assemble the other support pole
in the same way.
4. Unfold the reflector and lay it out
flat.
5. Insert the end of one support pole
into an end of the fabric guide
that runs along each of the two
sides of the panel.
2
6. Slide the pole through a far end
of the guide, into and through
the second guide and through
the third guide so that the pole
runs along the entire length of the
reflector.
1
2