Oben VH-A30 Tilt Head for Monopods - Manual (Page 9)

9
OPERATION
For convenience, the clamp’s
position can be repositioned, so
the quick-release knob and the
tilt-lock knob are on opposite
sides of the head.
1. Remove the quick-release plate.
2. Use the hex key to remove the
clamp attachment screw.
3. Reposition the clamp so the
quick-release knob and the tilt-
lock knob are on opposite sides
of the head.
4. Replace the screw, and tighten
it with the hex key until secure.
Repositioning the Clamp