Oben VH-A30 Tilt Head for Monopods - Manual (Page 8)

8
OPERATION
1. Turn the tilt lock knob
counterclockwise to unlock the
head.
2. Position the angle of the head,
and turn the knob clockwise to
tighten it.
Important: Always use one hand
to hold onto your camera while
adjusting the head. Be sure the tilt
lock is fully tightened before letting
the camera go.
Tilt Lock Knob
Quick-Release Knob
1. Turn the quick release knob
counterclockwise to loosen
the plate and reposition or
rebalance your camera.
2. Continue to loosen the clamp
to remove the plate from the
clamp.
3. Turn the knob clockwise to
lock the plate into position.