HyperX Armada 25 24.5" 240 Hz Gaming Monitor - Manual (Page 28)

HyperX Armada 25 FHD Gaming Monitor Page 27 of 29
IMPORTANT: Do not use cleaners that contain petroleum-based materials such as benzene, thinner, or
any volatile substance to clean the monitor screen or cabinet. These chemicals might damage the
monitor.
IMPORTANT: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface.
Never spray the cleaner directly on the screen surface. It can run behind the bezel and damage the
electronics. The cloth should be moist, but not wet. Water dripping into the ventilation openings or other
points of entry can cause damage to the monitor. Allow the monitor to air-dry before use.
5. After you remove the dirt and debris, you can also clean the surfaces with a disinfectant. The
World Health Organization (WHO) recommends cleaning surfaces, followed by disinfection, as a
best practice for preventing the spread of viral respiratory illnesses and harmful bacteria. A
disinfectant that is within HP’s cleaning guidelines is an alcohol solution consisting of 70%
isopropyl alcohol and 30% water. This solution is also known as rubbing alcohol and is sold in
most stores.
Shipping the monitor
Keep the original packing box in a storage area. You might need it later if you ship the monitor or move.
Technical specifications
HyperX Armada 25 FHD Gaming Monitor
Specification Description
Display size 62.2 cm 24.5 in
Display type IPS
Bezel type 3-sided borderless
Native resolution FHD 1920 x 1080
Maximum resolution FHD 1920 x 1080 @ 240 Hz
Maximum refresh rate range 240 Hz
Variable refresh rate technology G-SYNC Compatible
Variable refresh rate 48–240 Hz
Viewing angle 178°
Aspect ratio 16:9
Contrast ratio 1000:1
Brightness 400 nits