GeChic 1102I 11.6" 16:9 Portable Touchscreen LCD Monitor - Manual (Page 9)

Chapter 2 Installation Instructions
Section 1 Installation of Horizontal Display
Refer to the Fig., ① take the magnetic buckle off firstly, ② fold and attach
the rubber side of the magnetic buckle on the mental plate . Adjust the
position of the magnet buckle to change the viewing angles.
The min. viewing angle of horizontal
display is 40 degrees.
Do not attach the magnetic buckle higher
than the
blue line , otherwise it may
cause the monitor overturning.
3
Rear Dock
The Rear Dock shall be installed on the backside connector of
1102/1503. It equips with HDMI - A input and USB - A input for
installing Computer Stick or HDMI wireless display. For attach-
ing a power bank on the Rear Dock, refer to Chapter 2.
1102 Multi
Mount Kit
Proprietary for On - Lap1102 . Can be used as a stand of touch
monitor for varies viewing angles; can be installed on wall
mount or arm of VESA 75. Please refer to Chapter 2.
1102 Tripod
Mount Kit
(1/4” screw hole)
Proprietary for On - Lap1102. A 1/4” screw hole allows you to
install On - Lap1102 on a camera tripod. Please refer to Chapter
2.
Stand 4
An optional stand for On Lap 1102. It supports horizontal
display and 4 adjustable viewing angles.