StarTech.com Wall Mount Network Cabinet Enclosure (12 RU, 19") - Manual (Page 16)

Instruction manual
12
Mount the enclosure to the wall
Warning! Remove all equipment from the enclosure before you attempt to mount the
enclosure to the wall.
Warning! Wall structures vary and it is important to make sure that the type of
wall structure and mounting hardware that you are using will properly support the
mounted equipment. Failure to do so might result in personal injury and/or equipment
damage. The wall structure should be capable of supporting at least four times the
weight of the mounted equipment.
The RK12WALHM weighs 59.5 lb. (27 kg) and can hold up to 198 lb. (90 kg) in weight.
Warning! If you lack the necessary expertise to attach this product to the wall that
you’re using, contact a construction professional to install the enclosure or to provide
specific mounting instructions for your wall structure.
The number of mounting holes on the rear door of the enclosure will vary depending
on the model of your enclosure. Each mounting hole can accommodate an M8, M10,
5/16”, or 3/8” bolt.
• Follow the appropriate steps for the type of wall that you’re attaching the enclosure
to and attach the enclosure to the wall.
Caution! The enclosure is extremely heavy and you should not attempt to lift and
hang the enclosure without the assistance of other people.