StarTech.com Wall Mount Network Cabinet Enclosure (12 RU, 19") - Manual (Page 11)

Instruction manual
7
figure 4
Access your cables
There are two cable access covers on the enclosure that you can remove to access and
manage your cables.
1. To take off a cable access cover, use a Phillips type screwdriver to remove the two
screws on both ends of the cable access cover.
2. Pull the cable access cover away from the enclosure. ( figure 4 )
To put the cable access cover back on, place the cover over the cable access opening
and use a Phillips type screwdriver to insert the screws through the cover and into the
enclosure. Tighten the screws.