StarTech.com Wall Mount Network Cabinet Enclosure (12 RU, 19") User Manual
Page 13
Instruction manual
9
3. Flip the front door so that the levers are located on the opposite side.
4. Position the front door so that the top and bottom levers are aligned with the
washers located in the hinge area of the enclosure.
5. In the top corner of the front door, pull the lever down and release it into the washer
and hole in the enclosure.
6. In the bottom corner of the front door, pull the lever up and release it into the
washer and hole in the enclosure. (
figure 6
)
figure 6