Sony X85K 55" 4K HDR Smart LED TV User Manual

Page 21

Using the Menu

MAGNIFICATION

[OFF]

/ON

For selecting normal display (OFF) or magnified display
(ON).
Normal display (OFF) is selected whenever the power is
turned on.

MAG
POSITION

[CENTER]

UPPER/RIGHT/
LOWER/LEFT

For selecting the area to magnify when the magnification
mode is enabled.
The “MAG POSITION” setting is linked to the “POSITION”
setting of the PEAKING PLUS menu.

CENTER:

Magnifies the center area.

UPPER:

Magnifies the upper area.

RIGHT:

Magnifies the right area.

LOWER:

Magnifies the lower area.

LEFT:

Magnifies the left area.

AUTO RELEASE

[AUTO]

/MANUAL

For specifying the manner in which the magnified display
returns to normal display.

AUTO:

After the magnified display appears by pressing

ASSIGN switch, the display returns to normal
automatically after the specified time.

MANUAL:

After the magnified display appears by

pressing ASSIGN switch, the display returns to normal
when ASSIGN switch is pressed again.

PRESET

[OFF]

/ON

For selecting whether to enable the settings of BRIGHT,
CONTRAST controls and enables the preset “PRST
BRIGHT” and “PRST CONTRAST” values in the PRESET
menu.

OFF:

Enables the preset level that is set by the controls

ON:

Enables the PRESET menu settings

PRESET
SELECT
(Only HDVF-
EL30 is valid.)

[BOTH]

/OLED/

LCD

When “ON” is selected in “PRESET,” select the panel in
which each PRESET value is reflected.

BOTH:

Reflects the PRESET value to both the OLED and

LCD panel.

OLED:

Reflects the PRESET value only to the OLED

panel.

LCD:

Reflects the PRESET value only to the LCD panel.

PRST BRIGHT

–

99 to

[0]

to 99

For setting the image brightness when “ON” is selected in
“PRESET.”
Raising the value increases the brightness of the image.

PRST
CONTRAST

–

99 to

[0]

to 99

For setting the image contrast when “ON” is selected in
“PRESET.”
Raising the value increases the contrast of the image.

STATUS DISPLAY ASSIGN 1

OFF/

[ON]

For selecting whether the changes in the status of the
function assigned to the ASSIGN 1 switch is displayed (ON)
or not (OFF).

ASSIGN 2

OFF/

[ON]

For selecting whether the changes in the status of the
function assigned to the ASSIGN 2 switch is displayed (ON)
or not (OFF).

BRIGHT

OFF/

[ON]

For selecting whether the setting of the BRIGHT control is
displayed (ON) or not (OFF).

CONTRAST

OFF/

[ON]

For selecting whether the setting of the CONTRAST control
is displayed (ON) or not (OFF).

PEAKING

OFF/

[ON]

For selecting whether the setting of the PEAKING control is
displayed (ON) or not (OFF).

OLED

HIGH EYEPOINT

[OFF]

/ON

Switches between the normal display (OFF) and HIGH
EYEPOINT (ON).

EYE SENSOR

OFF/

[ON]

Set the eye sensor to ON or OFF. Set to “ON” normally.
When set to “OFF,” anti-burn-in to the OLED panel is not
processed and burn-in may occur.

Page

Menu

Item

Settings
(default in

[ ]

)

Function