Sony X85K 55" 4K HDR Smart LED TV - Manual (Page 13)

Switching the eye point / Adjusting the LCD monitor (HDVF-EL30 only)
13
Switching the eye point
When your eye is away from the eyecup while recording,
set the HIGH EYEPOINT function to “ON.” The
effective screen is displayed with a reduced display and
you can see the whole screen easily.
1
Switch the eye point by pressing the ASSIGN switch
assigned with the HIGH EYEPOINT function.
You can set this in “HIGH EYEPOINT” of the
OLED menu (page 21).
• When the HIGH EYEPOINT function is set to “ON,”
the resolution of the effective screen decreases.
• When the HIGH EYEPOINT function is set to “ON”
and used for extended periods, burn-in may occur.
Adjusting the LCD
monitor (HDVF-EL30
only)
When you open the LCD monitor, it turns on. When you
retract it with the screen side facing down, it turns off.
Adjusting the angle
You can rotate the LCD monitor to the opposite direction
by 180 degrees (the direction in which the monitor faces
an object) and to the other direction by 90 degrees.
When you rotate the monitor to the opposite direction by
180 degrees, the image is flipped horizontally (mirror
image).
When you retract the monitor with it rotated to the
opposite direction by 180 degrees, the image is flipped
horizontally and vertically.
The image flip can be set manually by setting “MIRROR”
to “MANUAL” in the LCD menu (page 22).
Adjusting the screen
For details on adjusting the screen, see “Adjusting the
screen” (page 10).
Using the LCD monitor as the tally
You can use the LCD monitor as the tally.
For details on the menu operation, see “Using the Menu”
on page 17.
1
Select “TALLY” in “DISPLAY MODE” in the LCD
menu.
2
Set “CAMERA NUMBER” in the LCD menu.
Notes
Normal
When HIGH EYEPOINT is set to “ON”
90°
1 8 0°