Sony WI-C300 Wireless In-Ear Headphones (Red) - Manual (Page 15)

Conn
ec
tio
n
s
a
nd
Op
er
at
ions
Connections
15 GB
Note
When connecting with the VISCA RS-232C connector,
make sure that DIP 1 switch 1 is set to ON, and DIP 1
switch 2 is set to OFF (page 9).
To assign camera addresses
Before operating, you must assign the camera addresses
to the connected cameras as follows. Then you can
switch to the camera to be controlled simply by pressing
the corresponding CAMERA button.
1
Turn on the power of all the connected cameras and
this unit.
2
Hold down the RESET button and press the
POWER button on this unit.
The unit recognizes the connected cameras and
assigns them camera addresses 1 to 7 automatically
in the connected order.
3
Press the POWER button on this unit and check that
the CAMERA buttons light.
The number of the lit CAMERA buttons indicates
how many cameras have the addresses assigned.
Now you can switch to the camera you want to
control by pressing the CAMERA button.
Connecting cameras equipped with
VISCA RS-422 connector
Connection via VISCA RS-422 connectors enables
control of multiple cameras. This allows the connection
up to 1,200 m (3,937 feet) away.
Prepare the connecting cable using the RS-422
connector plug that comes with this unit.
For making the cable, refer to the pin assignments of the
VISCA RS-422 connector (page 24).
For the use of the RS-422 connector plugs, see page 25.
Notes
• When connecting with the VISCA RS-422 connector,
make sure that DIP 1 switch 1 is set to ON, and DIP 1
switch 2 is set to ON (page 9).
• When the connections using the VISCA RS-422
connectors are made, the VISCA RS-232C connection
is not available.
MODE VISCA
1 9 1 9
RS-422 TALLY/CONTACT RS-232C !
DC 12V
LAN
RGB/COMPONENT VISCA RS-422
1 2 3 4 5 6 7 8 9
EXT SYNC IN
IR SELECT
75
1 2 3
OFF ON HD SD
IN VISCA RS-232 OUT SDI OUT DC IN 12V
R
VIDEO S VIDEO
RGB/COMPONENT VISCA RS-422
1 2 3 4 5 6 7 8 9
EXT SYNC IN
IR SELECT
75
1 2 3
OFF ON HD SD
IN VISCA RS-232 OUT SDI OUT DC IN 12V
R
VIDEO S VIDEO
RGB/COMPONENT VISCA RS-422
1 2 3 4 5 6 7 8 9
EXT SYNC IN
IR SELECT
75
1 2 3
OFF ON HD SD
IN VISCA RS-232 OUT SDI OUT DC IN 12V
R
VIDEO S VIDEO
VISCA RS-422
VISCA RS-422 cable
First camera
to the AC adaptor
Second camera
to the AC adaptor
VISCA RS-422 cable
Third to seventh camera
to the AC adaptor
to VISCA RS-422
VISCA RS-422
VISCA RS-422
VISCA RS-422
VISCA RS-422 cable
Camera
BRC-H900
VISCA RS-422
AC power adaptor
(supplied)
to AC
outlet
AC power
cord
(supplied)