Bluetooth rmt ctrl – Sony UWP-D27 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (UC90: 941 to 960 MHz) User Manual
Page 363
![background image](https://www.manualsdir.com/files/868001/content/doc363.png)
Interchangeable Lens Digital Camera
ILCE-7C
α7C
Bluetooth Rmt Ctrl
You can operate the camera using a Bluetooth remote commander (sold separately). For details on compatible remote
commander, visit the Sony web site in your area, or consult your Sony dealer or local authorized Sony service facility.
Select MENU →
(Network) → [Bluetooth Settings] → [Bluetooth Function] → [On] in advance. Refer to the
instruction manual for the Bluetooth remote commander as well.
Menu item details
On:
Enables Bluetooth remote commander operation.
Off:
Disables Bluetooth remote commander operation.
Hint
The Bluetooth connection is only active while you are operating the camera using the Bluetooth remote commander.
Note
When you initialize the camera, the pairing information is also deleted. To use the Bluetooth remote commander, perform pairing
again.
If the Bluetooth connection is unstable, remove any obstacles, such as people or metal objects from between the camera and the
paired Bluetooth remote commander.
You cannot use the following functions while [Bluetooth Rmt Ctrl] is set to [On].
Linking location information with a smartphone
Power-save function
If the function does not work properly, check the following notes and then try pairing again.
Confirm that the camera is not connected with other devices using the Bluetooth function.
Confirm that [Airplane Mode] for the camera is set to [Off].
Execute [Reset Network Set.] of the camera.
On the camera, select MENU →
(Network) → [Bluetooth Rmt Ctrl] → [On].
If there is no Bluetooth device currently paired with the camera, the screen for pairing as described in Step 2 will
appear.
1
On the camera, select MENU →
(Network) → [Bluetooth Settings] → [Pairing] to display the screen for
pairing.
2
On the Bluetooth remote commander, perform pairing.
For details, refer to the instruction manual for the Bluetooth remote commander.
3
On the camera, select [OK] on the confirmation screen for the Bluetooth connection.
Pairing is complete, and you can now operate the camera from the Bluetooth remote commander. After pairing
the device once, you can connect the camera and the Bluetooth remote commander again in the future by
setting [Bluetooth Rmt Ctrl] to [On].
4
363
- DWN-02N/30A Handheld Mic Transmitter for DWX Systems (A: 566 to 607 MHz) VCL-ECF2 Fisheye Converter For SEL16F28 and SEL20F28 UWP-D22 Camera-Mount Wireless Cardioid Handheld Microphone System (UC14: 470 to 542 MHz) PCM-A10 High-Resolution Audio Recorder UTX-P40 Wireless Plug-On Transmitter (UC25: 536 to 608 MHz) 16mm Fisheye Conversion Lens for FE 28mm f/2 Lens ZV-E1 Mirrorless Camera (White) ZV-E10 Mirrorless Camera (Black) LBN-H1 Airpeak Battery Station FX6 Full-Frame Cinema Camera (Body Only)