Zebra setting – Sony UWP-D27 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (UC90: 941 to 960 MHz) User Manual
Page 187
![background image](https://www.manualsdir.com/files/868001/content/doc187.png)
Interchangeable Lens Digital Camera
ILCE-7C
α7C
Zebra Setting
Sets a zebra pattern, which appears over part of an image if the brightness level of that part meets the IRE level that you
have set. Use this zebra pattern as a guide to adjust the brightness.
Menu item details
Zebra Display:
Sets whether to display the zebra pattern.
Zebra Level:
Adjusts the brightness level of the zebra pattern.
Hint
You can register values to check the correct exposure or overexposure as well as the brightness level for [Zebra Level]. The
settings for correct exposure confirmation and overexposure confirmation are registered to [Custom1] and [Custom2] respectively
in the default settings.
To check the correct exposure, set a standard value and the range for the brightness level. The zebra pattern will appear on
areas that fall within the range you set.
To check the overexposure, set a minimum value for the brightness level. The zebra pattern will appear over areas with a
brightness level equal to or higher than the value you set.
Note
The zebra pattern is not displayed on devices connected via HDMI.
5-021-699-11(1) Copyright 2020 Sony Corporation
MENU →
(Camera Settings2) → [Zebra Setting] → desired setting.
1
187
- DWN-02N/30A Handheld Mic Transmitter for DWX Systems (A: 566 to 607 MHz) VCL-ECF2 Fisheye Converter For SEL16F28 and SEL20F28 UWP-D22 Camera-Mount Wireless Cardioid Handheld Microphone System (UC14: 470 to 542 MHz) PCM-A10 High-Resolution Audio Recorder UTX-P40 Wireless Plug-On Transmitter (UC25: 536 to 608 MHz) 16mm Fisheye Conversion Lens for FE 28mm f/2 Lens ZV-E1 Mirrorless Camera (White) ZV-E10 Mirrorless Camera (Black) LBN-H1 Airpeak Battery Station FX6 Full-Frame Cinema Camera (Body Only)