GRAM FSI 401754 N/1 - Manual (Page 25)

EN
25
BEFORE CALLING YOUR AFTER SALES SERVICE
• Are the drawers placed properly?
• Are door joints broken or torn?
• Is your freezer on a level surface?
Recommendations
• To stop the appliance completely, unplug from main socket (for cleaning and
when the door is left open)
Tips for saving energy
1. Install the appliance in a cool, well ventilated room , but not in direct sunlight
and not near a heat source (radiator, cooker.. etc). Otherwise use an insulating
plate.
2. Allow warm food and drinks to cool down outside the appliance.
3. Cover drinks or other liquids when placing them in the appliance Otherwise
humidity increases in the appliance. Therefore, the working time gets longer.
Also covering drinks and other liquids helps to preserve smell and taste.
4. Try to avoid keeping the doors open for long periods or opening the doors too
frequently as warm air will enter the cabinet and cause the compressor to
switch on unnecessarily often.
5. Keep the covers of the different temperature compartments (crisper, chiller
...etc ) closed
6. Door gasket must be clean and pliable. Replace gaskets if worn.