GRAM FSI 401754 N/1 - Manual (Page 17)

EN
17
USAGE INFORMATION
Accessories
Making ice cubes
Ice tray (In some models)
• Fill the ice tray with water and place in the freezer compartment.
• After the water has completely turned into ice, you can twist the tray as shown
below to remove the ice cubes.
Icematic (In some models)
• Take out the ice making tray
• Fill the water to the line.
• Place the ice making tray in its
original position
• When ice cubes are formed,
twist the lever to drop ice cubes
into the icebox.
Note:
• Do not fill the icebox with water to make ice. This may damage it.
• The movement of the ice maker may be difficult while the freezer is running.
In such a case it should be cleaned by removing the glass shelves.
Removing the Ice maker
• Remove the freezer glass
shelves
• Remove the icemaker by
pulling left or right on the shelf.
You can remove the icemaker to increase the available volume in the freezer
compartment.
Visual and text descriptions on the accessories section may
vary according to the model of your appliance.