GRAM KS 3315-93 X/1 - Manual (Page 74)

8 EN
Electric connection
Connect your product to a grounded
socket which is protected by a fuse
with the appropriate capacity.
Important:
•
•
The connection must be in
accordance with national
regulations.
The power cable plug must be
easily accessible after installation.
• Extension cords and connector
sockets with several plugs must
not be used for connection.
B
A damaged power cable must be
replaced by a qualified electrician.
B
The product must not be operated
before it is repaired! There is danger of
electric shock!
Disposing of the packaging
The packaging may be dangerous
for children. Keep it out of the reach of
children or dispose of it by classifying
it in accordance with the waste
instructions. Do not dispose of it with
the normal household waste.
The packaging of your refrigerator
is made from recyclable materials.
Disposing of your old
refrigerator
Dispose of your old refrigerator
without harming the environment.
• You may consult your authorized
retailer or the recycling depot in your
municipality about the disposal of your
refrigerator.
Before disposing of your
refrigerator, cut out the electric plug
and, if there are any locks on the
door, make them inoperable in order
to protect children against any danger.
Placing and installation
1. Install your refrigerator to a place
that allows ease of use.
2. Keep your refrigerator away from
heat sources, humid places and direct
sunlight.
3. There must be appropriate air
ventilation around your refrigerator in
order to achieve an efficient operation.
4. Place your refrigerator on an even
floor surface to prevent jolts.
5. Do not keep your refrigerator in
ambient temperatures under 10°C.
Replacing the interior light
bulb
To change the Bulb/LED used for
illumination of your refrigerator, call
your Authorised Service.